Tech Service Bulletin No. G060/G570 – 010
Page 2 of 3
SOLUTION:
Replace the Guide Plate with the newly registered "Guide Plate – Middle Registration assembly
(#G0602613):
1.
Make sure that the main switch is turned off and the power cord is unplugged.
2.
Remove the following parts:
•
Rear Cover [A] (4 screws)
•
Upper Exit Cover [B]
Note: Also remove the Mailbox if installed.
•
Upper Rear Cover [C] (4 screws)
•
Right Cover [D] (2 screws)
•
Upper Right Cover [E]
•
Right Rear Cover [F] (3 screws)
Tech Service Bulletin No. G060 – Draft011
Page 3 of 3
[B]
[C]
[A]
[F]
[E]
[D]
[G]
Continued...