Nib Firmware History - Gestetner G060 Service Manual

Firmware History for G060

NIB FIRMWARE HISTORY:

DESCRIPTION OF MODIFICATION
Installed from the first mass production run.
The followings have been corrected:
When the job is canceled, the lpr
connection is terminated and a blank space
is displayed in the syslog. Instead of the
blank space, "Lost connection" is displayed.
When 50 or more lpq/lprm commands are
sent, the lpd process cannot be completed
properly and the job is not printed out.
If DHCP is ON and TCP/IP is OFF, the
current device name (RNPXXXXXX) in
SmartNetMonitor is not displayed.
NIB stops printing if several prints jobs are
continuously sent to the NIB via the IPP
port (SmartNetMonitor for Client), and a
print job sent via the standard IPP port may
be canceled.
The followings have been corrected:
Nothing was displayed even though the
"prnlog 0" command was done in telnet.
The following have been corrected:
If an undefined remote printer number is
input in the Netware configuration page,
communication between the NIB and
Netware Server will be cut off.
No error message is displayed in Netscape
Navigator even when an incorrect URL is
input in the address bar.
Up to 32 characters can be input in the
NetBEUI configuration screen Comment
box, even though specification is 31
characters maximum.
If Trap is selected for the Access Type in
the SNMP Configuration screen during the
snmpd process, communication may be cut
off.
The NIB does not respond to the "lprm –"
command (root directory) from a FreeBSD
host computer.
TCP Ports 11021 and 11023 (Design use)
have been closed.
There were two error messages displayed
when no files were available for download
using FTP. The two messages were
merged to "550: No such file or directory".
Continued On Next Page
FIRMWARE SERIAL
LEVEL NUMBER
G0605920 J July 2001
G0605920 K
July 2001
G0605920 L September
2001
G0605920 M January
2002
CHECK
FIRMWARE
SUM
VERSION
1.72.1 B453
1.74 3355
1.75.1 64F4
1.78 AB29
Page 14 of 16