Gestetner G060 Service Manual page 1100

Firmware History for G570
P/N Version
G5705391K 1.12
<<E>>
G5705391L 1.13
<<G>>
Check
Contents of Modification
Sum
EE00 ♦
PS
- 16bit color blend data does not print
correctly.
- Slow Printing from AutoCAD.
- Printing may not work correctly
when a protocol other than
EtherTalk is used on Macintosh
8.x/9.x.
- The printer controller locks-up when
printing from Unix Acrobat.
- Lines may be printed on the blank
of page.
-
The error log is not described in
Configuration page when the punch
error occurred.
- When data is sent that outputs 3
hole punch to the European model
(which supports 2&4 hole punch),
output has 2 hole punch. (Now
output has no punch).
- Printing on envelope may not work
correctly.
♦
PJL
- Response to PJL INFO CONFIG
command does not include serial
number.
•
-
The following have been fixed:
♦
PCL
- The following problems with the CAD
print file were fixed.
1) Modified the available pen number
from 8 to 256 when BitSw #3-3 is ON.
2) The "null" character is ignored when
it is included in HP/GL2 data.
3) The status flag for the bold selection
command is refreshed when the bold
selection command In HP/GL2 data is
selected.
- Supports mixed binding orientations
with duplex jobs using cover sheets.
- When
command, duplex print does not work.
-The downloaded PCL Barcode fonts
are not printed correctly on the PCL
font list.
- The Barcodes are printed with shift.
- Selecting HDD font may reduce
available memory.
- Supported SAP Barcode & OCR
printing.
♦
PS
- PS error occurs when unknown media
type is specified.
- The default setting of mainframe
System/Resolution is "1200 x 600dpi".
using the "PageLength"
Production
December,
2002
Not available
Page 7 of 11