Gestetner G060 Service Manual page 849

3. REPLACEMENT AND ADJUSTMENT
3.1 CONTROLLER
NOTE: After replacing the controller, remove the NVRAM, HDD, DIMM, BIOS
ROM, and battery on the old board and install them on the new board.
1. Controller box [A] (! x 2)
2. Controller cover [B] (! x 18, " x 2)
3. Controller [C] (! x 11, " x 1)
4. After replacing the controller, remove
the NVRAM [D], HDD [E], DIMM [F],
BIOS ROM [G], and battery [H] on
the old board and install them on the
new board.
NOTE: The controller as a service part
does not include the NVRAM,
HDD, DIMM, BIOS ROM, and
battery.
SM
[A]
[C]
[G]
[H]
3-1
CONTROLLER
[B]
G082R101.WMF
[D]
[F]
[E]
G082R103.WMF
G082