Gestetner G060 Service Manual page 954

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – DSC38/DSc38S
RICOH – AP3800C/AP3800CMF
SAVIN – SLP38C/SLP38cS
SUBJECT: BCU BOARD & DRIVE UNIT – K DEVELOPMENT
GENERAL:
A fusing clutch has been added to the black development drive unit (P/N G0771100). This change
maximizes the life of the fusing unit and oil supply unit. For this modification, the BCU board has also
been changed. For details of these changes please see TSB G060/G570 – 020. The following parts
updates are being issued for all G060 Parts Catalogs. Please update you parts catalog with the following
information.
OLD PART NO. NEW PART NO.
G0775061
G0601100
UNITS AFFECTED:
All G060 printers manufactured after the serial numbers listed below will have the new style Fusing Clutch
and BCU Board installed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
   
Copyright 2003 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
G060/G570 – 021
G0775067 BCU Board
G0771100 Drive Unit – K Development
MODEL NAME
Gestetner DSC38
Ricoh AP3800C
Savin SLP38C
DESCRIPTION
SERIAL NUMBER
P6011100001
P6011100001
P6011100001
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
01/31/2003
REFERENCE
QTY INT PAGE ITEM
1 1 85 *
1 1 57 4