Gestetner G060 Service Manual page 897

Tech Service Bulletin No. G060 – 007
Page 2 of 3
Installation Workflow:
Unpack the printer
Install additional memory into the controller (if required)
Will the rack be installed?
Yes
Assemble the rack
Dock the scanner and printer to the rack
Plug the scanner into the controller and plug the printer
power cord into the scanner
NOTE: if the printer is turned ON before this point the
LCD display will be blank
Install the platen cover or ARDF
Is the G060 a preconfigured
model?
Yes
No
No
A
on following page
Not Sure
See the first page to identify
Unpack the printer
Will a paper feed unit (PFU) or LCT be installed?
Yes
1. Place the printer on the feed unit (PFU) or LCT
2. Install the PFU or LCT
Install controller options (if required)
Install the Duplex Unit (if required)
Will the rack be installed?
Yes
1. Install the Printer
2. Assemble the rack during printer initialization
Dock the scanner and printer to the rack
1. Install the copier feature expander
(includes DIMMS and IPU board)
2. Install 40G HDD
3. Install Optional NVRAM module
Install the platen cover or ARDF
No
No
Install the printer
Continued...