Gestetner G060 Service Manual page 958

Tech Service Bulletin No. G060 – 023
Page 2 of 3
Detailed Notes for the 3 Cause/Solutions from the Above Table
NOTE 1: Avoiding paper types not supported on this printer
Please advise users not to use the following paper types on this printer:
•
Paper out of weight specification:
Paper weight specifications:
Paper Trays:
By-pass Tray: 60 to 163g/m
•
Paper meant to be used with an ink-jet printer
•
Coated paper
•
Thermal, carbon or conductive paper, aluminum foil
•
Paper with the following characteristics:
* Bent, folded, creased, curled, twisted, torn, wrinkled, or damp
* Dry enough to generate static electricity
* Paper with preprinted images (except letterhead)
* Paper with windows, holes, perforations, cutouts, or embossing
* Label paper with any of its sticky surfaces exposed
* Paper with clips or staples
NOTE 2: How the machine interprets paper types selected in the printer driver
The printer is not able to interpret the "Cardstock," "Label" and "Envelope" paper type settings in the driver,
and will treat such cases the same as Plain Paper (see table on next page).
As a result, the oil supply roller becomes dirty with toner, an insufficient amount of oil is applied to the fusing
belt, and a paper jam occurs. This may also result in offset images.
Therefore advise users to:
1) Always feed Envelopes, Label Paper and Normal Thick Paper from the Bypass Tray.
2) Always use Thick Paper as the driver setting whenever feeding the following types:
Paper Type Used
Normal Thick Paper
Labels
Cardstock
Envelope
2
60 to 105 g/m (16 to 28lb)
2
(16 to 43lb)
Paper Feed Station
By-pass tray
By-pass tray
By-pass tray
By-pass tray
Driver Setting
Thick Paper
Thick Paper
Thick Paper
Thick Paper
Continued...