Gestetner G060 Service Manual page 1089

Firmware History for G060
DESCRIPTION OF MODIFICATION
The following have been corrected:
The printing speed of a PS job slows down
after a PS3 job is reset.
The following have been corrected:
When paper size error occurs using PCL
printing, the printer error message of SNM
for Client is not displayed on the PC
The following have been corrected:
PCL- Slow Printing from AutoCAD.
PS- Euro symbol is not printed.
Please refer to "PUB (C) – 045 EURO
SYMBOL NOT PRINTED WITH PS
DRIVER" for the procedure of how to fix this
issue.
PS print file is printed as text.
The following have been corrected:
After using User Tool on operation panel,
PCL print jobs may keep showing
"Printing..." on operation panel.
Form Lines value (under PCL Menu)
change after reboot the Machine.
PCL:
Response to PJL INFO CONFIG command
does not include serial number.
The print may stop during the processing of
the file when using "INFICO".
The work area of RAM is reduced whenever
fonts that have been downloaded to HDD
are used
PS:
16bit color blend data does not print
correctly.
Slow Printing from AutoCAD.
Printing may not work correctly when a
protocol other than EtherTalk is used on
Macintosh 8.x/9.x.
The printer controller locks-up when printing
from Unix Acrobat.
Lines may be printed on the blank pages.
The error log is not described in
"Configuration Page" when the punch error
occurred.
When data is sent that outputs 3 hole punch
to the European models (which supports
2&4 hole punch), output has 2-hole punch.
(Now output has no punch).
Printing on envelope may not work
correctly.
PJL:
Response to PJL INFO CONFIG command
does not include serial number.
FIRMWARE SERIAL
LEVEL NUMBER
G0775910 H
July
G0775911 H 2002
G0775910 J
September
G0775911 J 2002
G0775910 K October
G0775911 K 2002
G0775910 L December
G0775911 L 2002
FIRMWARE CHECK
VERSION SUM
2.16 F270
7677
2.17 9A5A
BDF1
2.18 2A77
4BAB
2.19 1421
2E85
Page 12 of 16