Gestetner G060 Service Manual page 540

SERVICE PROGRAM MODE – CF CONFIGURATION
SP Mode Button Summary
Here is a short summary of the touch-panel buttons.
c
Opens all SP groups and sublevels.
d
Closes all open groups and sublevels and restores the initial SP mode display.
e
Opens the copy window (copy mode) so you can make test copies. To return to the SP
mode screen, press SP Mode (highlighted) in the copy window.

f
Enter the SP code directly with the number keys if you know the SP number and then
press . (The required SP Mode number will be highlighted when pressing
just press the required SP Mode number.)
g
Press twice to leave the SP mode and return to the copy window to resume normal
operation.
h
Press any Class 1 number to open a list of Class 2 SP modes.
i
Press to scroll the display to the previous or next group.
j
Press to scroll to the previous or next display in segments the size of the screen display
(page).
k
Press to scroll the display to the previous or next line, line by line.
l
Press to move the highlight on the left to the previous or next selection in the list.
G570
 
” • –
5-2
‘ ’
—
“
„
G570S902.WMF

. If not,
SM