Gestetner G060 Service Manual page 1070

Tech Service Bulletin No. G082 – 005
Page 3 of 3
It is not recommended to upgrade pre-modification MIF for SP7-908, since it is necessary to not only
install the 8 KB RAM, but also to replace all maintenance kits (kit PM counters stored in NVRAM).
The following shows the SP7-908 displays for machines with the 4 KB NVRAM and each version of
main/controller firmware:
NVRAM = 4KB
B1.15E or
earlier
B1.17C or
later
2.12 or earlier
(feature not displayed)
(feature not displayed)
Controller firmware
2.13 or later
Unspecified value displayed.
SP7-908 value is "999.99".