Gestetner G060 Service Manual page 730

SERVICE PROGRAM MODE
SP4-XXX (ROM Versions)
4
101 001
102 001
103 001
104 001
106 001
107 001
SP5-XXX (Initializing)
5
101 Initialize SRAM
000
102 Erase All Files
000
103 Reset Bit Switches
000
104 Factory setting
000
105 Delete All Speed Dials
001
002
SP6-XXX (Reports)
6
101 System Parameter List
000
102 Service Monitor Report
000
103 G3 Protocol Dump List
001
002
G307
Mode No.
FCU ROM Version
Error Codes
G3-1 ROM Version
G3-2 ROM Version
G4 ROM Version
Charge ROM Version
Mode No.
Speed Dials Enabled
Speed Dials Disabled
Mode No.
G3 All
Communications
G3-1 (All
Communications)
Displays the FCU ROM version.
Displays the latest 64 fax error codes.
Displays the G3-1 modem version.
Displays the G3-2 modem version.
Displays the G4 (ISDN) ROM version.
Not used.
Initializes the bit switches and user
parameters, user data in the SRAM, files in
the SAF memory, and clock.
Erases all files stored in the SAF memory.
Resets the bit switches and user
parameters.
Resets the bit switches and user
parameters, user data in the SRAM and
files in the SAF memory.
200 speed dials and 1000 quick dials are
available when the Fax Function Upgrade
Unit is installed.
1200 quick dials (but no speed dials) are
available when the Fax Function Upgrade
Unit is installed.
Touch the "ON" button to print the system
parameter list.
Touch the "ON" button to print the service
monitor report.
Prints the protocol dump list of all
communications for all G3 lines.
Prints the protocol dump list of all
communications for the G3-1 line.
3-6
Function
Function
Function
SM