Gestetner G060 Service Manual page 1084

Firmware History for G060
DESCRIPTION OF MODIFICATION
The following have been corrected:
♦
Fusing belt rotation timing (warm-up) and lamp
off timing (job end) have been changed to
prevent unnecessary occurrences of SC543
(heating roller fusing lamp overheat).
♦
Occurrence conditions for SC552 changed from
150sec to 210sec to prevent unnecessary
occurrences.
♦
Fusing jam misdetection with left door closed
due to vibration of fusing exit sensor feeler.
The following have been corrected:
♦
"Copying" displayed for about 30 seconds
before copying begins·
♦
Color drum lock at first color print following a 3-
hour interval when energy saver is disabled.
FIRMWARE SERIAL
LEVEL NUMBER
G0775623 H March
2003
G0775623 J April
2003
FIRMWARE CHECK
VERSION SUM
B1.25 094B
B1.26 4ED0
Page 7 of 16