Gestetner G060 Service Manual page 302

CONTROLLER
Paper Output Tray
The output tray can be selected with the "Output Tray" setting in the "System"
menu (Menu/ System/ Output Tray).
If a print job does not specify an output tray or if the driver specifies the default tray,
the output tray selected with this user tool will be used.
Output Tray Selected
• If the machine cannot print to the selected output tray, it prints to the default
paper output tray.
• If paper overflow is detected at the selected output tray, the controller stops
printing until the overflow detector goes off.
Sequential Stacking
When the 4-bin mailbox is installed, "Auto
Tray SW" is selected as the output tray in
the "System" menu, and "Printer Default" is
specified as the output tray in the driver,
the machine automatically sends the
output to the lowest tray. When that tray
fills up, the machine sends the output to
the next lowest tray. When that tray also
fills up, the machine sends the output to
the next lowest tray sequentially.
This feature is called "Sequential
Stacking."
• If a tray becomes full and paper is
detected in the next tray, the machine
displays an error and stops printing.
When paper in the next tray is removed,
the machine automatically resumes
printing to the next tray.
• If all trays become full (overflow detected in
all trays), the machine displays an error
and stops printing. This time, all paper in all
trays must be removed.
G060 6-72
Tray 4
Tray 3
Tray 2
Tray 1
Internal Tray
G060D556.WMF
SM