Gestetner G060 Service Manual page 1098

Firmware History for G570
P/N Version
G5705391F 1.08
<<A>>
G5705391G 1.08.5
<<B>>
G5705391H 1.09
<<B>>
G5705391J 1.11
<<D>>
Check
Contents of Modification
Sum
972E - When the HDD option is not installed,
PCL HDD Directory List and Font Source
sections will not appear on the PCL
Configuration Page.
♦
PS
- The black dither will not be used
with the DeviceGray command.
FD19 •
Counter values displayed on the
configuration sheet for "Pages Printed"
have been changed as follows:
♦
SP7-003-01 [-20 / -21]
[-30 / -23].
•
The following have been fixed:
♦
PCL
- Modified the dither size for when
the UDFP command is used
♦
PS
- Margin for Custom size has been
changed from 12 to 11 points to
expand the maximum printing area.
- Modified the dither setting for when
the DeviceGray command is used.
•
Change in Specification:
Supports the Status Readback function of
the PCL5e.
9809 •
The following has been fixed:
♦
The printing speed of a PS job slows
down after a PS3 job is reset
•
C775
Counter values displayed on the
configuration sheet for "Pages Printed"
have been changed as follows for when
Meter Click Charge mode is on and
development count method has been
selected: SP7-003-01 [-30 / -23]
003-01 [-20 / -21]
•
Does not go Online when the time setting
is changed greatly on the operation panel.
•
When paper size error occurs using PCL
printing, the printer error message of SNM
for Client is not displayed on the PC.
•
The following have been fixed:
♦
Toner near end alert of the replaced
toner doesn't disappear even if one of
the toner cartridges is replaced when
more than one toner are toner near
end condition.
♦
PCL
- Euro font does not print correctly.
- Line Spacing Command,
"Esc&l#D", causes incorrect output.
- Slow Printing from AutoCAD.
♦
PS
- Euro symbol is not printed. Please
refer to TSB PUB(C) - 045
- PS print file is printed as text.
Production
May, 2002
June, 2002
SP7-003-01
July, 2002
.
October,
2002
SP7-
Page 5 of 11