Gestetner G060 Service Manual page 445

2. PREVENTIVE MAINTENANCE
2.1 USER MAINTENANCE
The following maintenance kits are available for the customer to do PM's.
Type A: Color (C/M/Y) PCU
Type B: Color (C/M/Y) Development Unit
Type C: Fusing Unit
Type D: Black Development Unit / Dust Filter
Type E: Waste Toner Bottle
Type F: Black PCU
Type G: Oil Supply Unit
Type H: Paper Feed Rollers
Chart: A4(LT)/5%
Mode: 5 copies/original
Environment: Normal temperature and humidity
Yield may change depending on circumstances and copy conditions.
When the machine's default settings are used, an error message is displayed when
a maintenance counter reaches the value in the following PM table, except for the
items in maintenance kit H.
NOTE: To have the machine display the message for maintenance kit H as well,
set SP5-930-4 to 1.
After the user replaces the items in a maintenance kit, the machine automatically
resets the counter for this maintenance kit, except for the items in kit H.
NOTE: Except for the items in kit H, the machine can automatically detect when
new items have been installed.
The machine stops when the counters for parts in maintenance kits C, E and G
reach the replacement value in the following table.
NOTE: To have the machine display the alert only for maintenance kits C, E, and
G, set SP5-930-3 to 0.
SM
100k copies
100k copies
100k copies
150k copies
2-1
USER MAINTENANCE
50k copies
50k copies
50k copies
20k copies
G570