Gestetner G060 Service Manual page 706

1.2.4 EXPANSION MEMORY INSTALLATION
[C]

CAUTION
Before installing this option, do the following:
1. Print out all data in the printer buffer.
2. Turn off the main switch and disconnect the power cord and the
network cable.
1. Slide the expansion memory [A] into the CN602 slot and tilt it down until it is
locked by the pin [B].
NOTE: When installing the fax unit and expansion memory at the same time, turn
on the DIP switch [C] on the MBU board.
G307
[A]
1-10
FAX UNIT OPTIONS
[B]
G307I102.WMF
SM