Gestetner G060 Service Manual page 972

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – DSC38/DSC38S
LANIER – 2138AH/2138CMF
RICOH – AP3800C/AP3800CMF
SAVIN – SLP38C/SLP38CS
SUBJECT: SC471
SYMPTOM:
An SC471, Transfer Belt Home Position service code may appear in the display.
CAUSE:
Transfer Contact Motor disconnects from bracket, causing the gear to fail. Also, when an outside force is
applied to the bracket, it may deform and the gear will separate from the bracket.
SOLUTION:
A new style DC Motor (P/N G0773706) has been released to increase the contact area with the bracket and,
the bushing inside the motor has been lengthened. To prevent the bracket from deforming, a reinforcing
section has also been added.
GENERAL:
The following part update is being issued for all G060 Parts Catalogs.
OLD PART NO. NEW PART NO.
G0603990
UNITS AFFECTED:
All G060 printers manufactured after the serial numbers listed below will have the new style DC Motor
installed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
Copyright     2003 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
G060/G570 – 028
G0773706 DC Motor – 1.56W
MODEL NAME
Gestetner DSc38
Lanier 2138
Ricoh Aficio AP3800C
Savin SLP38c
DESCRIPTION
SERIAL NUMBER
P6011200613
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
04/25/2003
REFERENCE
QTY INT PAGE ITEM
1 1 59
Page 1 of 1
8