Gestetner G060 Service Manual page 432

MACHINE INSTALLATION
[C]
[E]
G570I205.WMF
2. Replace the printer module [A] in the upper slot (CN7) with DIMM #1
(SYSTEM) [B].
3. Insert DIMM #2 (PRT/SCN) [C] into the center slot (CN8).
4. Insert the 128MB memory [D].
NOTE: 1) It is not necessary to install the additional memory if the present
memory is 192MB or more.
2) Make sure that the modules are firmly set in their slots. If they are
not, this will cause SC997.
5. Attach the NVRAM board [E] ( x 1).
NOTE: 1) It is not necessary to install this NVRAM board in machines that
already contain the optional User Account Enhancement Unit Type
B. However, if the P/N on the Unit Type B decal is G0606070 or
G0606070A, it is necessary to use Timer Setting in UP Mode
System Settings when adjusting the time zone setting (as SP5-302-2
in Copy SP mode will not function properly).
2) If replacing the Unit Type B (all P/N) with the NVRAM board, be sure
to back up and re-enter the User Code data using SmartNetMonitor
for Admin.
G570
[A]
[B]
[D]
1-14
[C]
[B]
G570I701.WMF
SM