Gestetner G060 Service Manual page 1099

Firmware History for G570
P/N Version
G5705391J 1.11
<<D>>
G5705391K 1.12
<<E>>
Check
Contents of Modification
Sum
C775 •
Counter values displayed on the
configuration sheet for "Pages Printed"
have been changed as follows for when
Meter Click Charge mode is on and
development count method has been
selected:
SP7-003-01 [-30 / -23]
/ -21]
•
It does not go Online when the time
setting is changed greatly on the operation
panel.
•
When paper size error occurs using PCL
printing, the printer error message of SNM
for Client is not displayed on the PC.
•
The following have been fixed:
♦
Toner near end alert of the replaced
toner doesn't disappear even if one of
the toner cartridges is replaced when
more than one toner are toner near
end condition.
♦
PCL
- Euro font does not print correctly.
- Line Spacing Command,
"Esc&l#D", causes incorrect output.
- Slow Printing from AutoCAD.
♦
PS
- Euro symbol is not printed.
Please refer to TSB PUB(C) - 045,
for the procedure of how to fix this
issue.
- PS print file is printed as text.
•
EE00
The following have been fixed:
♦
After using User Tool on operation
panel, PCL print jobs may keep
showing "Printing..." on operation
panel.
♦
Form Lines value (under PCL Menu)
change after reboot the Machine.
♦
PCL
- Response to PJL INFO CONFIG
command does not include serial
number.
- The print may stop during the
processing of the file when using
"INFICO".
- The work area of RAM is reduced
whenever fonts that have been
downloaded to HDD are used.
Production
October,
2002
SP7-003-01 [-20
December,
2002
Page 6 of 11