Gestetner G060 Service Manual page 625

5.7.3 FIRMWARE UPGRADE

CAUTION
1. Turn off the main switch whenever inserting or removing an IC card.
2. Open the front cover whenever updating the firmware.
3. Do not turn off the machine while downloading the firmware.
1. Make sure that the main switch is turned off.
2. Remove the IC card cover [A].
3. Fully insert the IC card [B] containing the required
firmware into the IC card slot on the controller.
4. Open the front cover.
5. Turn on the main switch. The message below is
displayed. Press the button where the firmware
description is displayed.
P C c a r d - > R O M P a g e 0 1
6. Pressing the UpDate button starts
updating the firmware. To indicate the
progress, bars change to asterisks
one by one.
SM
ROM:G0775611C NEW:G0775611F
Engine (1)
ROM:RB1.10:23 NEW:RB111C:23
Current Version
Exit (0)
- Engine - Scanner IPU
- Music - OpePanel.DOM
- Onboard Sys - Opt DIMM Fax
- Network Support
5-87
FIRMWARE UPDATE PROCEDURE
[A]
[B]
New Version (IC Card)
G570S911.WMF
P C c a r d - > R O M P a g e 0 1
R O M : G 0 7 7 5 6 1 1 C
Engine (1)
R O M : R B 1 . 1 0 : 2 3
Verify(./*) Exit(0)
PCcard -> ROM Page01
Loading
Engine
------------
G570S502.WMF
N E W : G 0 7 7 5 6 1 1 F
N E W : R B 1 1 1 C : 2 3
UpDate(0)
G570S912.WMF
G570S913.WMF
G570