Gestetner G060 Service Manual page 960

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – DSC38/DSC38S
RICOH – AP3800C/AP3800CMF
SAVIN – SLP38C/SLP38CS
SUBJECT: SC220-004 AND COLOR MISSING
SYMPTOM:
SC220-004 may occur when the first B/W page is printed out after turning on the main power switch or the
machine recovers from Energy Saver Mode.
CAUSE:
The modified EMAC (EMAC2) on the LD Unit sometimes does not work properly with Engine Firmware
version B1.19 or older.
ACTION IN THE FIELD:
Upgrade the engine firmware to version B1.21 or later on machines from the serial number ranges listed
below when the problem is reported, or when installing the new Laser Optics Housing Unit (P/N #G0801853)
with EMAC2.
Machines equipped with the EMAC2 that require upgrade to version B1.21 or later:
G060-17: P6020700040 to P6020701800
G060-17: P8920700001 to P8920700100; P8920800001 to P8920800050
UNITS AFFECTED:
All G060 Printers manufactured other than those serial numbers listed below will have the new style EMAC2
and version B1.21installed during production.
Machines equipped with the EMAC2 that require an upgrade to version B1.21 or later:
MODEL NAME
Gestetner DSC38
Ricoh AP3800C
Savin SLP38C
   
Copyright 2003 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
G060/G570 – 024
: P6020700040 to P6020701800 P8920700001 to
P8920700100, P8920800001 to P8920800050
: P6020700040 to P6020701800 P8920700001 to
P8920700100, P8920800001 to P8920800050
: P6020700040 to P6020701800 P8920700001 to
P8920700100, P8920800001 to P8920800050
SERIAL NUMBER
03/14/2003
Continued....