Gestetner G060 Service Manual page 209

Mode No.
7
(Class 1, 2, and 3)
[Jam Paper Size]
506
4 A3
5 A4
13 B4
14 B5
32 11 x 17
36 8 1/2 x 14
38 8 1/2 x 11
44 5 1/2 x 8 1/2
128 Others
507 [Jam History]
1 Latest
2 Latest-1
3 Latest-2
4 Latest-3
5 Latest-4
6 Latest-5
7 Latest-6
8 Latest-7
9 Latest-8
10 Latest-9
[Firmware Ver.] Engine Firmware Version
801
1 Engine P/N
2 Duplex
3 Finisher
4 PSU/LCT
5 Mail Box
6 MUSIC P/N
11 MUSIC
12 Engine
803 [PM Counter]
(Sheets or Rotations, Unit, [Color])
Dev.: Development Unit, PF: Paper Feed Rollers, Oil Supply: Oil Supply Unit, Fusing:
Fusing Unit, Transfer: Transfer Unit
1 S:PCU [K]
2 S:PCU [Y]
3 S:PCU [M]
4 S:PCU [C]
5 S:Dev. [K]
6 S:Dev. [Y]
7 S:Dev. [M]
8 S:Dev. [C]
9 S:Oil Supply
10 PF By-pass
11 PF Tray 1
12 PF Tray 2
13 PF Tray 3/LCT
14 PF Tray 4
15 S:Fusing
16 S:Transfer
SM
PRINTER ENGINE SERVICE MODE
Function / [ Setting ]
* Displays the number of jams according to the
P paper size.
[ 0 to 9999 / 0 / 1 sheet/step ]
* Displays the 10 most recently detected paper
P jams.
* Displays the part number of the firmware.
Displays the firmware version.
Displays the part number of the firmware.
Displays the firmware version.
* Displays the number of sheets printed for each
current maintenance unit.
[ 0 to 9999999 / 0 / 1 sheet/step ]
PM counters click up based on the number of A4
(LT) LEF size sheets printed. Therefore, the A3
(DLT) Double Count is activated. The Double
Count cannot be deactivated.
When a unit is replaced, the machine
automatically detects that the new unit is installed.
Then, the current PM counter value is
automatically moved to the PM Counter - Previous
(SP7-906-1 to 9) and is reset to "0".
The total number of sheets printed with the last
unit replaced can be checked with SP7-906-1 to 9.
NOTE: The LCT is counted as the 3rd feed
station.
5-41 G060