DUPLEX INVERTER UNIT
2.3.3 FEED TO DUPLEX FEED UNIT
[A]
[C]
[B]
G571D107.WMF
G571D111.WMF
This shows how the machine feeds paper back into the machine after side 1 has
been printed.
The junction gate [A] diverts the paper from the fusing unit to the lower part of the
inverter unit. After the duplex inverter sensor [B] has been activated, the machine
waits until the trailing edge has passed junction mylar 3 [C]. Then, the paper is
switched back and junction mylar 3 directs the paper back into the machine for the
second side.
The next page shows how the paper is fed out to the finisher after both sides have
been printed.
G571
7-10
SM