Gestetner G060 Service Manual page 592

COPY SP MODE
7
(Class 1, 2, and 3)
201 [Total Scan Counter]
1 Total Scan Counter
202 [D Unit Op Ctr] Development Unit Operation Counter
1 Print: B&W
2 Print: Color
3 Development: B&W
4 Development: Color
204 [Paper Tray Counter]
1 Tray 1
2 Tray 2
3 Tray 3/LCT
4 Tray 4
5 By-pass
6 Duplex
205 [ADF Total Counter]
1 ADF Total Counter
206 [Staple Counter]
1 Staple Counter
[Punch Counter]
209
1 Punch
301 [Copy Co.: Mag.] Copy Counter: Magnification
1 Reduce 25% <-->49%
2 Reduce 50% <-->99%
3 Full Size
4 Enlarge 101%<-->200%
5 Enlarge 201%<-->400%
6 Direct Mag.
7 Direct Size Mag.
8 Auto reduce/Enlarge
[Copy Co.: Copy Mode] Copy Counter: Copy Mode
304
1 Text
2 T/P (Glossy Photo)
3 T/P (Printed Photo)
4 T/P (Copied Photo)
5 Photo (Glossy Photo)
6 Photo (Printed Photo)
7 Photo (Copied Photo)
8 Generation Copy
9 Pale
10 Map
11 Punch
12 Repeat
G570
Mode No.
*
CTL
*
CTL
*
CTL
*
CTL
*
CTL
*
CTL
NV
*
NV
Function / [ Setting ]
Displays the total number of scans.
[ 0 to 9999999 / 0 / 1 scan/step ]
Displays the number of prints made with black
development unit operation only.
[ 0 to 9999999 / 0 / 1 print/step ]
Displays the number of prints made with color
development unit operation.
[ 0 to 9999999 / 0 / 1 print/step ]
Displays the number of developments made with
black development unit operation only.
[ 0 to 9999999 / 0 / 1 development/step ]
Displays the number of developments made with
color development unit operation.
[ 0 to 9999999 / 0 / 1 development/step ]
Displays the number of sheets fed from each
paper feed station.
[ 0 to 9999999 / 0 / 1 sheet/step ]
NOTE: The LCT is counted as the 3rd feed
station.
Displays the total number of originals fed by the
ARDF.
Displays the total number of staples fired.
Displays the number of times hole punching has
been done.
* Displays the number of copies made with each
magnification ratio.
Displays the total number of copies made in the
copy mode by each operation mode.
5-54 SM