Gestetner G060 Service Manual page 585

Mode No.
5
(Class 1, 2, and 3)
[Line Position Adj.]
993
Line Positioning Adjustment ([Color])
M: Main-scan, S: Sub-scan, Reg.: Registration, Mag.: Magnification
For example: M Reg = Main scan registration
1 Mode Selection
2 Execute
3 Temperature
4 Interrupt
5 Stand-by
6 Job Start
SM
Function / [ Setting ]
* Specifies when the automatic line position
BCU adjustment is done.
[ 0 to 2 / 1 / 1/step ] Alphanumeric
0: Never done
1: Process Control (Done at a) all process control
self checks except after toner end recovery and
developer initialization, b) new PCU detected, and
c) the temperature has changed by 5°C since the
last adjustment)
2: Except Procon (As for setting '1', except it is not
done during self-checks. However, it is done at
the initial process control self check.
The size of the 5°C difference can be changed
with SP5-993-3
Use to make a line position adjustment.
Specifies the temperature for starting the line
positioning adjustment.
o
[ 3 to 15 / 5 / 1/ C]
The line position adjustment automatically starts
when the temperature differs by the amount
specified in this SP mode from the temperature
when the last adjustment was done.
There are two thermistors on the laser optics-
housing unit. The thermistor close to the fusing
unit monitors the temperature for this adjustment.
Enables or disables the line position adjustment
during a print job when the temperature differs by
the amount specified in SP5-993-003 from the
temperature at the last adjustment.
[ 0 or 1 / 1 / - ] Alphanumeric
0: Disabled
1: Enabled
Enables or disables the line position adjustment
during stand-by mode when the temperature
differs by the amount specified in SP5-993-003
from the temperature at the last adjustment.
[ 0 or 1 / 0 / - ] Alphanumeric
0: Disabled
1: Enabled
Enables or disables the line position adjustment
just before starting a color print job when the
temperature differs by the amount specified in
SP5-993-003 from the temperature when the
machine woke up from energy saver mode.
[ 0 or 1 / 1 / - ]
0: Disabled
1: Enabled
5-47
COPY SP MODE
G570