Gestetner G060 Service Manual page 622

REBOOT / SYSTEM SETTING RESET
5.6 REBOOT / SYSTEM SETTING RESET
5.6.1 SOFTWARE RESET
The software can be rebooted when the machine hangs up. To reboot the
software, use the following procedure.
Turn the main power switch off and on.
-or-
Press and hold down  together for over 10 seconds. When the machine
beeps once, release both buttons. After "Now loading. Please wait" is displayed for
a few seconds, the copy window will open. The machine is ready for normal
operation.
5.6.2 SYSTEM SETTINGS AND COPIER SETTING RESET
System Setting Reset
The system settings in the UP mode can be reset to their defaults. Use the
following procedure.
1. Press User Tools/Counter
2. Hold down  and then press System Settings.
NOTE: You must press  first.
3. When the message prompts you to confirm that you want to reset the system
settings, press Yes.
4. When the message tells you that the settings have been reset, press Exit.
G570
.
5-84
G570S903.WMF
SM