Scanner Application Firmware - Gestetner G060 Service Manual

Firmware History for G570

3. SCANNER APPLICATION FIRMWARE

P/N Version
G5705386A 1.00
G5705386B 1.03
G5705386C 1.06
<<G>>
Check
Contents of Modification
Sum
- Firmware installed from the first mass
production run.
•
DCB6
The following has been fixed:
♦
PP mode software bug
•
F1BB
The following bug is fixed.
♦
SC990 will occur when scanning from
the TWAIN driver and the defined
document size on TWAIN is larger
than the paper size that the ADF
detected. An error message, "The
length of the original exceeds limit." is
displayed in the TWAIN driver U/I.
♦
e.g. Document size on TWAIN Driver:
A3 Portrait (A3 SEF), ADF detected
paper size: A4 SEF
♦
When printing a job while scanning
from the TWAIN driver, the scanning
process is interrupted. An error
message, "Scanner memory is in use
for other function. Check the
scanner." is displayed in the TWAIN
driver U/I.
♦
Scanner terminates connection and
SC997 is displayed when the data
load on the MFP is high, such as at
the full condition for recovery delivery
jobs or delivery requests, continuous
memory transmissions,
memory/substitute receptions of over
1000 pages, or transfer station for
over 1000 pages.
Production
December,
2001
January,
2002
July, 2002
Page 9 of 11