Figure 9.5 Status Output In Standby → Manual Reset Sequence - Hitachi SH7750 Hardware Manual

Standby → → → → Manual Reset
Oscillation stops Reset
CKIO
*1
SCK2
Normal Standby Reset Normal
STATUS *2
0–30 Bcyc
0–10 Bcyc
Notes: *1 When standby mode is exited by means of a manual reset, a WDT count is not
performed. Hold low for the PLL oscillation stabilization time.
*2 Undefined
Figure 9.5 STATUS Output in Standby → → → → Manual Reset Sequence
Rev. 6.0, 07/02, page 239 of 986