Hitachi SH7750 Hardware Manual page 873

Notes: 1. Connect V
regardless of whether or not the PLL circuits and RTC are used.
2. The current dissipation values are for V
output pins unloaded.
3. I is the sum of the V
DDQ
* To reduce the leakage current in standby mode, the RTC must be turned on (input the
clock from EXTAL2 and set RCR2.RTCEN to 1).
, V , and V
DD-PLL1/2 DD-RTC DD-CPG
, V
DDQ DD-PLL1/2
to V , and V , V
DDQ SS-CPG
min = V – 0.5 V and V
IH DDQ
, V , and V 3.3 V system currents.
DD-RTC DD-CPG
, and V to GND,
SS-PLL1/2 SSQ-RTC
max = 0.5 V with all
IL
Rev. 6.0, 07/02, page 823 of 986