Hitachi SH7750 Hardware Manual page 722

Sh7750 series superh risc engine

Hide thumbs Also See for SH7750:

Table of Contents

Bit 3—Framing Error (FER): Indicates whether or not a framing error has been found in the

data that is to be read next from SCFRDR2.

Bit 2—Parity Error (PER): Indicates whether or not a parity error has been found in the data that

is to be read next from SCFRDR2.

Rev. 6.0, 07/02, page 672 of 986

There is no framing error that is to be read from SCFRDR2

[Clearing conditions]

Power-on reset or manual reset

When there is no framing error in the data that is to be read next from

There is a framing error that is to be read from SCFRDR2

[Setting condition]

When there is a framing error in the data that is to be read next from

There is no parity error that is to be read from SCFRDR2

[Clearing conditions]

Power-on reset or manual reset

When there is no parity error in the data that is to be read next from

There is a parity error in the receive data that is to be read from SCFRDR2

[Setting condition]

When there is a parity error in the data that is to be read next from

(Initial value)

Chapters

Table of Contents

Sh7750r Sh7750s