Show Storm-Control Unknown-Unicast - Dell Force10 MXL Blade Reference Manual

Example Figure 32-2. show storm-control multicast Command Example
FTOS#show storm-control multicast tengigabitethernet 1/0
Interface
-----------------------------------------------
TenGig 1/0
FTOS#

show storm-control unknown-unicast

Display the storm control unknown-unicast configuration
Syntax show storm-control unknown-unicast [ interface ]
Parameters
interface
Defaults none
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Figure 32-3. show storm-control unknown-unicast Command Example
Example
FTOS#show storm-control unknown-unicast tengigabitethernet 3/0
Interface
-----------------------------------------------
TenGig 3/0
FTOS#
storm-control broadcast (Configuration)
Configure the packets per second of broadcast traffic.
Syntax storm-control broadcast [ packets_per_second ] in
To disable broadcast rate-limiting, use the no storm-control broadcast [ packets_per_second ] in
command.
Multicast storm control configuration
Direction
Ingress
(OPTIONAL) Enter one of the following interfaces to display the interface specific storm
control configuration.
• For a 10-Gigabit Ethernet interface, enter the keyword
the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
port information.
Introduced on MXL 10/40GbE Switch IO Module
Unknown-unicast storm control configuration
Direction
Ingress
Packets/Second
5
Packets/Second
1000
TenGigabitEthernet
followed by
fortyGigE
followed by the slot/
Storm Control | 607