Debugging and Diagnostics
This chapter contains three sections:
•
•
•
Offline Diagnostic Commands
The offline diagnostics test suite is useful for isolating faults and debugging hardware. While tests are
running, the Dell Force10 operating software (FTOS) results are saved as a text file
(TestReport-SU-X.txt) in the flash directory. The show file command is available only on Master and
Standby.
Important Points to Remember
•
•
•
•
The offline diagnostics commands are:
•
•
•
diag stack-unit
Run offline diagnostics on a stack unit.
Syntax
diag stack-unit number
Parameters
number
alllevels
Offline Diagnostic Commands
Buffer Tuning Commands
Hardware Commands
Offline diagnostics can only be run when the unit is offline.
You can only run offline diagnostics on a unit to which you are connected via the console. In other
words, you cannot run diagnostics on a unit to which you are connected via a stacking link.
Diagnostic results are stored in a file (TestReport-SU-X.txt) in the flash directory. To review the
results, use the show file command, which prints the results to the screen.
Diagnostics only test connectivity, not the entire data path.
diag stack-unit
offline stack-unit
online stack-unit
[ alllevels | level0 | level1 | level2 ] verbose no-reboot
Enter the stack-unit number.
Range: 0 to 5
Enter the keyword
alllevels
to run the complete set of offline diagnostic tests.
39
Debugging and Diagnostics | 675