Show Ip Ospf Timers Rate-Limit - Dell Force10 MXL Blade Reference Manual

Ftos command line reference guide for the mxl 10/40gbe switch io module

Hide thumbs Also See for Force10 MXL Blade:

Table of Contents

Figure 21-18. show ip ospf process-id statistics Command Example

FTOS#show ip ospf 10 statistics

Interface TenGigabitEthernet 4/45

clear ip ospf statistics

show ip ospf timers rate-limit

Show the LSA currently in the queue waiting for timers to expire.

show ip ospf process-id timers rate-limit

Command Modes

EXEC Privilege

Version 8.3.16.1

Figure 21-19. show ip ospf process-id timers rate-limit Command Example

FTOS#show ip ospf 10 timers rate-limit

List of LSAs in rate limit Queue

LSA id: 1.1.1.0 Type: 3 Adv Rtid: 3.3.3.3 Expiry time: 00:00:09.111

LSA id: 3.3.3.3 Type: 1 Adv Rtid: 3.3.3.3 Expiry time: 00:00:23.96

Error packets (Receive statistics)

Neighbor ID 3.1.1.2

Packet Statistics

Queue Statistics

Enter the OSPF Process ID to show a specific process.

If no Process ID is entered, command applies only to the first OSPF process.

Introduced on MXL 10/40GbE Switch IO Module

AreaMisMatch

Clears the packet statistics in all interfaces and neighbors

Open Shortest Path First (OSPFv2) | 429