Debug Arp; Debug Ip Dhcp - Dell Force10 MXL Blade Reference Manual

Command Modes
Command
History

debug arp

Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information

debug ip dhcp

Syntax
Defaults
Command Modes
Command
History
294 | IPv4 Routing
EXEC Privilege
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
View information on ARP transactions.
debug arp [ interface ] [ count value ]
To stop debugging ARP transactions, use the no debug arp command.
interface
(OPTIONAL) Enter the following keywords and slot/port or number information:
• For the Management interface, enter the keyword
by the slot/port information. The slot range is 0 and the port range is 0.
• For a Port Channel interface, enter the keyword
Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
slot/port information.
• For a VLAN, enter the keyword
count value
(OPTIONAL) Enter the keyword
Range: 1 to 65534
none
EXEC Privilege
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Use the count option to stop packets from flooding the user terminal when debugging is turned on.
Enable debug information for DHCP relay transactions and display the information on the console.
debug ip dhcp
To disable debug, use the no debug ip dhcp command.
Debug disabled
EXEC Privilege
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
managementethernet
port-channel
tengigabitethernet
fortyGigE
vlan
followed by a number from 1 to 4094.
count
followed by the count value.
followed
followed by a number:
followed
followed by the