Show Boot System - Dell Force10 MXL Blade Reference Manual

Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs Also See for Force10 MXL Blade:
Table of Contents

Advertisement

rename
Rename a file in the local file system.
Syntax
rename url url
Parameters
url
Command Modes
EXEC Privilege
Command
Version 8.3.16.1
History

show boot system

Displays information about boot images currently configured on the system.
Syntax
show boot system stack-unit {0-5 | all}
Parameters
0-5
all
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Figure 3-5. show boot system Command Example
Example
Enter the following keywords and a filename:
For a file on the internal Flash, enter
For a file on the external Flash, enter
Introduced on MXL 10/40GbE Switch IO Module
Enter this information to display the boot image information of only the entered stack-unit
Enter this keyword to display the boot image information of all the stack-units in the stack
Introduced on MXL 10/40GbE Switch IO Module
FTOS#show boot system stack-unit all
Current system image information in the system:
=============================================
Type
Boot Type
----------------------------------------------------------------
Stack-unit 0 is not present.
Stack-unit 1 is not present.
Stack-unit 2 is not present.
Stack-unit 3 is not present.
Stack-unit 4 is not present.
Stack-unit 5
DOWNLOAD BOOT 9-1-0-675
flash://
usbflash://
A
followed by the filename.
followed by the filename.
B
9-1-0-684
File Management | 27

Advertisement

Table of Contents
loading

Table of Contents