Related
Commands
vlan max-age
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
460
|
Per-VLAN Spanning Tree Plus (PVST+)
vlan bridge-priority
vlan forward-delay
vlan max-age
show spanning-tree pvst
Set the time interval for the PVST+ bridge to maintain configuration information before refreshing that
information.
vlan vlan-range max-age seconds
To return to the default, use the no vlan max-age command.
vlan vlan-range
max-age seconds
20 seconds
CONFIGURATION (conf-pvst)
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
vlan bridge-priority
vlan forward-delay
vlan hello-time
show spanning-tree pvst
Set the bridge-priority value
Change the time interval before FTOS transitions to the forwarding state
Change the time interval before PVST+ refreshes
Display the PVST+ configuration
vlan
Enter the keyword
followed by the VLAN number(s).
Range: 1 to 4094
max-age
Enter the keyword
FTOS waits before refreshing configuration information.
Range: 6 to 40 seconds
Default: 20 seconds
Set the bridge-priority value
Change the time interval before FTOS transitions to the forwarding state
Change the time interval between BPDUs
Display the PVST+ configuration
followed by the time interval, in seconds, that