Show Ip Ospf Database External - Dell Force10 MXL Blade Reference Manual

Related
Commands

show ip ospf database external

Syntax
Parameters
Command Modes
Command
History
412 | Open Shortest Path First (OSPFv2)
Table 21-4. show ip ospf database asbr-summary Command Description
Item
Link State ID
Advertising Router
Checksum
Length
Network Mask
TOS
Metric
show ip ospf database
Display information on the AS external (type 5) LSAs.
show ip ospf process-id database external [ link-state-id ] [ adv-router ip-address ]
process-id
Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
link-state-id
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends
on the LSA type, and it can be one of the following:
• the network's IP address for Type 3 LSAs or Type 5 LSAs
• the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router
(OPTIONAL) Enter the keywords
ip-address information about that router.
EXEC
EXEC Privilege
Version 8.3.16.1
Description
Displays the Link State ID.
Identifies the advertising router's ID.
Displays the Fletcher checksum of the an LSA's complete contents.
Displays the length in bytes of the LSA.
Displays the network mask implemented on the area.
Displays the Type of Service (TOS) options. Option 0 is the only option.
Displays the LSA metric.
Displays OSPF database information.
adv-router
Introduced on MXL 10/40GbE Switch IO Module
ip-address to display only the LSA