Vlan Forward-Delay - Dell Force10 MXL Blade Reference Manual

vlan forward-delay

Set the amount of time the interface waits in the Listening State and the Learning State before
transitioning to the Forwarding State.
Syntax vlan <vlan-id> forward-delay seconds
To return to the default setting, enter no vlan forward-delay command.
Parameters
vlan vlan-range
forward-delay
seconds
Defaults 15 seconds
Command Modes
CONFIGURATION (conf-pvst)
Command
Version 8.3.16.1
History
Related
vlan bridge-priority
Commands
vlan hello-time
vlan max-age
show spanning-tree pvst
vlan hello-time
Set the time interval between generation of PVST+ 7Bridge Protocol Data Units (BPDUs).
Syntax
vlan <vlan-id> hello-time seconds
To return to the default value, enter no vlan hello-time command.
Parameters
vlan vlan-range
hello-time seconds
Defaults
2 seconds
Command Modes CONFIGURATION (conf-pvst)
Command
Version 8.3.16.1
History
vlan
Enter the keyword followed by the VLAN number(s).
Range: 1 to 4094
forward-delay
Enter the keyword
FTOS waits before transitioning PVST+ to the forwarding state.
Range: 4 to 30 seconds
Default: 15 seconds
Introduced on MXL 10/40GbE Switch IO Module
Set the bridge-priority value
Change the time interval between BPDUs
Change the time interval before PVST+ refreshes
Display the PVST+ configuration
Enter the keyword
Range: 1 to 4094
Enter the keyword
between transmission of BPDUs.
Range: 1 to 10 seconds
Default: 2 seconds
Introduced on MXL 10/40GbE Switch IO Module
followed by the time interval, in seconds, that
vlan
followed by the VLAN number(s).
hello-time
followed by the time interval, in seconds,
Per-VLAN Spanning Tree Plus (PVST+) | 459