Banner Exec - Dell Force10 MXL Blade Reference Manual

asf-mode
Syntax
Parameters
Defaults
Command Modes
Command History
Usage Information

banner exec

Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
38 | Control and Monitoring
Enable alternate store and forward (ASF) mode and forward packets as soon as a threshold is reached.
asf-mode stack-unit {unit-id | all} queue size
To return to standard store and forward mode, use the no asf-mode stack-unit command.
unit-id Enter the stack member unit identifier of the stack member to reset.
Range: 0 - 5
all
queue size Enter the queue size of the stack member.
Range: 1 - 15
Not configured.
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
You must save the configuration and reload the system to implement ASF. When you enter the
command, the system sends a message stating that the new mode is enabled when the system reloads.
Configure a message that is displayed when a user enters EXEC mode.
banner exec c line c
c
Enter the keywords
by the letter
line
Enter a text string for your banner message ending the message with your delineator.
In the example below, the delineator is a percent character (%); the banner message is
"testing, testing".
No banner is displayed.
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Optionally, use the banner exec command to create a text string that is displayed when the user
accesses EXEC mode. The exec-banner command toggles that display.
banner exec
, and then enter a character delineator, represented here
c
, and press ENTER.