Show Gvrp - Dell Force10 MXL Blade Reference Manual

Example Figure 12-1. show garp timers Command Example
FTOS#show garp timers
GARP Timers
----------------------------------------
Join Timer
Leave Timer
LeaveAll Timer
FTOS#
Related
garp timers
Commands

show gvrp

Display the GVRP configuration.
Syntax show gvrp [ brief | interface ]
Parameters
brief
interface
Defaults none
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Figure 12-2. show gvrp brief Command Example
Example
R3#show gvrp brief
GVRP Feature is currently enabled.
Port
-------------------------------------------------------
Te 3/0
Te 3/1
Te 3/2
Te 3/3
Te 3/4
Te 3/5
Te 3/6
Te 3/7
Te 3/8
R3#show gvrp brief
Usage If no ports are GVRP participants, the message output changes from:
Information
GVRP Participants running on <port_list>
Value (milliseconds)
200
600
10000
Sets the intervals (in milliseconds) for sending GARP messages.
(OPTIONAL) Enter the keyword
configuration.
(OPTIONAL) Enter the following keywords and slot/port or number information:
• For a Port Channel interface, enter the keyword
number: Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
slot/port information.
Introduced on MXL 10/40GbE Switch IO Module
GVRP Status
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
brief
to display a brief summary of the GVRP
port-channel
TenGigabitEthernet
fortyGigE
Edge-Port
No
No
No
No
No
No
No
No
No
GARP VLAN Registration (GVRP) | 223
followed by a
followed by the