Snmp-Server Contact; Snmp-Server Enable Traps - Dell Force10 MXL Blade Reference Manual
Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs
Also See for Force10 MXL Blade:
- Configuration manual (690 pages) ,
- Deployment manual (89 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
Related
Commands
snmp-server contact
Syntax
Parameters
Defaults
Command Modes
Command
History
snmp-server enable traps
Syntax
584
|
Simple Network Management Protocol (SNMP) and Syslog
ip access-list standard
snmp
show running-config
Configure contact information for troubleshooting this SNMP node.
snmp-server contact text
To delete the SNMP server contact information, use the no snmp-server contact command.
text
Enter an alphanumeric text string, up to 55 characters long.
none
CONFIGURATION
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
Enable SNMP traps.
snmp-server enable traps [ notification-type ] [ notification-option ]
To disable traps, use the no snmp-server enable traps [
command.
Names (or selects) a standard access list to filter based on IP address.
Displays the current SNMP configuration and defaults.
notification-type
] [
notification-option
]
Advertisement
Table of Contents
