Iscsi Enable - Dell Force10 MXL Blade Reference Manual

iscsi enable

Globally enable iSCSI optimization.
Syntax iscsi enable
To disable iSCSI optimization, use the no iscsi command.
Parameters
enable
Defaults Enabled.
Command Modes
CONFIGURATION
Command
History
Version 8.3.16.1
Usage
When you enable the iSCSI feature using the iscsi enable command, flow control settings are set to rx
Information
on tx off on all interfaces.
iscsi priority-bits
Configure the priority bitmap to be advertised in iSCSI application TLVs.
Syntax iscsi priority-bits
To remove the configured priority bitmap, use the no iscsi priority-bits command.
Defaults 4 (0x10 in the bitmap)
Command Modes
PROTOCOL LLDP (only on global, not on interface)
Command
Version 8.3.16.1
History
iscsi profile-compellant
Configure the auto-detection of Compellent arrays on a port.
iscsi profile-compellent
Syntax
Defaults Compellent disk arrays are not detected.
Command Modes
INTERFACE
Command
History
Version 8.3.16.1
enable
Enter the keyword
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
to enable the iSCSI optimization feature.
iSCSI Optimization | 325