Routing Information Protocol (Rip); Overview; Commands - Dell Force10 MXL Blade Reference Manual

Routing Information Protocol (RIP)

Overview

Routing information protocol (RIP) is a distance vector routing protocol. The Dell Force10 operating
software (FTOS) supports both RIP version 1 (RIPv1) and RIP version 2 (RIPv2).
The FTOS implementation of RIP is based on IETF RFCs 2453 and RFC 1058. For more information
about configuring RIP, refer to the FTOS Configuration Guide.

Commands

The following commands allow you to configure RIP:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
auto-summary
clear ip rip
debug ip rip
default-information originate
default-metric
description
distance
distribute-list in
distribute-list out
ip poison-reverse
ip rip receive version
ip rip send version
ip split-horizon
maximum-paths
neighbor
network
offset-list
output-delay
passive-interface
redistribute
redistribute ospf
router rip
show config
show ip rip database
26
Routing Information Protocol (RIP) | 491