Dell Force10 MXL Blade Reference Manual page 75

This display output is an accumulation of the same information that is displayed when you execute one
of the following show commands:
•
•
•
•
•
•
•
•
•
•
•
•
•
Related
show version
Commands
show system
show environment
show processes memory
telnet
Connect through Telnet to a server. The Telnet client and server in FTOS supports IPv4 connections.
You can establish a Telnet session directly to the router, or a connection can be initiated from the
router.
Syntax telnet { host | ip-address } [ /source-interface ]
Parameters
host
ip-address
source-interface
show cam
show clock
show environment
show file
show interfaces
show inventory
show ip protocols
show ip route summary
show processes cpu
show processes memory
show redundancy
show running-conf
show version
Enter the name of a server.
Enter the IPv4 address in dotted decimal format of the server.
(OPTIONAL) Enter the keywords
information to include the interface's IP address.
Enter the following keywords and slot/port or number information:
•
•
•
•
•
•
Displays the FTOS version.
Displays the current switch status.
Displays system component status.
Displays memory usage based on the running processes.
For a Loopback interface, enter the keyword
from zero (0) to 16383.
For the Null interface, enter the keyword
For a Port Channel interface, enter the keyword
number:
Range: 1-128
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
the slot/port information.
For a VLAN interface, enter the keyword
to 4094.
/source-interface
followed by the interface
loopback
followed by a number
null
followed by 0.
port-channel
TenGigabitEthernet
fortyGigE
vlan
followed by a number from 1
Control and Monitoring | 75
followed by a
followed by