Show Gvrp Statistics - Dell Force10 MXL Blade Reference Manual

Related
Commands

show gvrp statistics

Syntax
Parameters
Defaults
Command Modes
Command
History
Example
Usage
Information
224 | GARP VLAN Registration (GVRP)
to
GVRP Participants running on no ports
show gvrp statistics
Display the GVRP configuration statistics.
show gvrp statistics { interface interface | summary }
interface interface
summary
none
EXEC
EXEC Privilege
Version 8.3.16.1
Figure 12-3. show gvrp statistics Command Example
FTOS#show gvrp statistics int tengig 1/0
Join Empty Received: 0
Join In Received: 0
Empty Received: 0
LeaveIn Received: 0
Leave Empty Received: 0
Leave All Received: 40
Join Empty Transmitted: 156
Join In Transmitted: 0
Empty Transmitted: 0
Leave In Transmitted: 0
Leave Empty Transmitted: 0
Leave All Transmitted: 41
Invalid Messages/Attributes skipped: 0
Failed Registrations: 0
FTOS#
Invalid messages/attributes skipped can occur in the following cases:
• The incoming GVRP PDU has an incorrect length.
• "End of PDU" was reached before the complete attribute could be parsed.
• The Attribute Type of the attribute that was being parsed was not the GVRP VID Attribute Type
(0x01).
Displays the GVRP statistics.
interface
Enter the keyword
port or number information:
• For a Port Channel interface, enter the keyword
number: Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
by the slot/port information.
summary
Enter the keyword
Introduced on MXL 10/40GbE Switch IO Module
followed by one of the interface keywords and slot/
port-channel
fortyGigE
to display just a summary of the GVRP statistics.
followed by a
followed