Advertise Med Guest-Voice-Signaling - Dell Force10 MXL Blade Reference Manual
Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs
Also See for Force10 MXL Blade:
- Configuration manual (690 pages) ,
- Deployment manual (89 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
Defaults
Command Modes
Command
History
Related
Commands
advertise med guest-voice-signaling
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
364
|
Link Layer Discovery Protocol (LLDP)
DSCP_value
priority-tagged number
Unconfigured
CONFIGURATION (conf-lldp)
Version 8.3.16.1
protocol lldp (Configuration)
debug lldp interface
show lldp neighbors
show running-config lldp
Configure the system to advertise a separate limited voice service for a guest user when the guest voice
control packets use a separate network policy than the voice data.
advertise med guest-voice-signaling
number}
To return to the default, use the
DSCP_value} |
{
priority-tagged number}
vlan-id
layer2_priority
DSCP_value
priority-tagged number
unconfigured
CONFIGURATION (conf-lldp)
\
Version 8.3.16.1
debug lldp interface
show lldp neighbors
show running-config lldp
Enter the DSCP value.
Range: 0 to 63
priority-tagged
Enter the keyword
Range: 0 to 7
Introduced on MXL 10/40GbE Switch IO Module
Enables LLDP globally.
Debugs LLDP.
Displays the LLDP neighbors.
Displays the LLDP running configuration.
{
vlan-id layer2_priority DSCP_value} |
no advertise med guest-voice-signaling
command.
Enter the VLAN ID.
Range: 1 to 4094
Enter the Layer 2 priority.
Range: 0 to 7
Enter the DSCP value.
Range: 0 to 63
priority-tagged
Enter the keyword
Range: 0 to 7
Introduced on MXL 10/40GbE Switch IO Module
Debugs LLDP
Displays the LLDP neighbors
Displays the LLDP running configuration
followed the Layer 2 priority.
{
priority-tagged
{
vlan-id layer2_priority
followed the Layer 2 priority.
Advertisement
Table of Contents
