Show Ntp Status - Dell Force10 MXL Blade Reference Manual

Command
Version 8.3.16.1
History
Example Figure 35-6. show ntp associations Command Example
FTOS#show ntp associations
remote
==========================================================================
10.10.120.5
*172.16.1.33
172.31.1.33
192.200.0.2
* master (synced), # master (unsynced), + selected, - candidate
FTOS#
Table 35-1. show ntp associations Command Fields
Field
(none)
remote
ref clock
st
when
poll
reach
delay
offset
disp
Related

show ntp status

Commands
show ntp status
Display the current NTP status.
Syntax show ntp status
Command Modes EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Introduced on MXL 10/40GbE Switch IO Module
ref clock st when poll reach
0.0.0.0 16
127.127.1.0 11
0.0.0.0 16
0.0.0.0 16
Description
One or more of the following symbols could be displayed:
• * means synchronized to this peer
• # means almost synchronized to this peer
• + means the peer was selected for possible synchronization
• - means the peer is a candidate for selection
• ~ means the peer is statically configured
Displays the remote IP address of the NTP peer.
Displays the IP address of the remote peer's reference clock.
Displays the peer's stratum, that is, the number of hops away from the external time source. A
16 in this column means the NTP peer cannot reach the time source.
Displays the last time the switch received an NTP packet.
Displays the polling interval (in seconds).
Displays the reachability to the peer (in octal bitstream).
Displays the time interval or delay for a packet to complete a round-trip to the NTP time source
(in milliseconds).
Displays the relative time of the NTP peer's clock to the switch clock (in milliseconds).
Displays the dispersion.
Displays current NTP status.
Introduced on MXL 10/40GbE Switch IO Module
delay offset
- 256 0 0.00
6 16 377 -0.08
- 256 0 0.00
- 256 0 0.00
disp
0.000 16000.0
-1499.9 104.16
0.000 16000.0
0.000 16000.0
System Time and Date | 643