Dell Force10 MXL Blade Reference Manual page 376

Ftos command line reference guide for the mxl 10/40gbe switch io module

Hide thumbs Also See for Force10 MXL Blade:

Table of Contents

Command Modes

Command Modes

Multiple Spanning Tree Protocol (MSTP)

msti instance

bridge-priority priority

default bridge-priority is 32768

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

By default, all VLANs are mapped to MST instance zero (0) unless you use the vlan range command

to map it to a non-zero instance.

Although MSTP instance IDs range from 0 to 4094, only 64 active instances are supported on the

The name you assign to the multiple spanning tree region.

name region-name

To remove the region name, use the no name command.

Enter the MST region name.

Range: 32 character limit

MULTIPLE SPANNING TREE

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

For two MSTP switches to be within the same MSTP region, the switches must share the same region

name (including matching case).

Maps the VLAN(s) to an MST instance.

Assigns the revision number to the MST configuration.

Enter the MST instance number.

Range: 0 to 4094.

Enter the keyword

followed by the identifier range value.

Range: 1 to 4094

bridge-priority

Enter the keyword

4096 as the bridge priority.

Range: zero (0) to 61440

Valid priority values are: 0, 4096, 8192, 12288, 16384, 20480, 24576,

28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, and 61440. All

other values are rejected.

followed by a value in increments of