Logging Coredump - Dell Force10 MXL Blade Reference Manual

format flash
Erase all existing files and reformat the filesystem in the internal flash memory. After the filesystem is
formatted, files cannot be restored.
Syntax format {flash: | usbflash:}
Default
flash memory
Command Modes EXEC Privilege
Command
Version 8.3.16.1
History
Usage
You must include the colon (:) when entering this command.
Information
Related
copy
Commands
show file
show file-systems

logging coredump

Enable coredump.
logging coredump stack-unit all
Syntax
Command Modes
CONFIGURATION
Command
Version 8.3.16.1
History
Usage The Kernel core dump can be large and may take up to five to 30 minutes to upload. FTOS does not
Information
overwrite application core dumps so delete them as necessary to conserve space on the flash; if the
flash is out of memory, the coredump is aborted. FTOS completes the coredump process and waits
until the upload is complete before rebooting the system.
Related
logging coredump server
Commands
Introduced on MXL 10/40GbE Switch IO Module
Caution:
This command deletes all files, including the startup configuration file. So, after
executing this command, consider saving the running config as the startup config (use the
write memory command or the copy run start command).
Copies the current configuration to either the startup-configuration file or the
terminal.
Displays the contents of a text file in the local filesystem.
Displays information about the file systems on the system.
Introduced on MXL 10/40GbE Switch IO Module
Designates a sever to upload kernel core-dumps.
File Management | 25