Dell Force10 MXL Blade Reference Manual page 477

burst-KB
peak peak-rate
Defaults Burst size is 100 KB. peak-rate is by default the same as committed-rate . Granularity for
committed-rate
Command Modes
QOS-POLICY-IN
Command
Version 8.3.16.1
History
Related
rate police
Commands
qos-policy-input
rate-shape
Shape traffic output as part of the designated policy.
Syntax rate-shape [ kbps ] rate [ burst-KB ]
Parameters
kbps
rate
burst-KB
Defaults Burst size is 50 KB. Granularity for rate is Mbps unless the kbps option is used.
Command Modes
QOS-POLICY-OUT
Command
Version 8.3.16.1
History
Usage When rate-shape in QoS policy is applied both on queue level and aggregate mode, the queue-based
Information
shaping occurs first followed by the aggregate rate shaping.
Related
rate shape
Commands
qos-policy-output
(OPTIONAL) Enter the burst size in KB.
Range: 16 to 200000 KB
Default: 100 KB
(OPTIONAL) Enter the keyword
Range: 0 to 10000 Mbps
Default: Same as designated for
and peak-rate is Mbps unless the kbps option is used.
Introduced on MXL 10/40GbE Switch IO Module
Specifies traffic policing on the selected interface.
Creates a QoS output policy.
Enter this keyword to specify the rate limit in Kilobits per second (Kbps). On
MXL Switch, make the following value a multiple of 64. The default granularity
is Megabits per second (Mbps).
Range: 0-40000000 (Kbps)
Enter the outgoing rate in multiples of 10 Mbps.
Range: 10 to 10000
(OPTIONAL) Enter a number as the burst size in KB.
Range: 0 to 10000
Default: 50
Introduced on MXL 10/40GbE Switch IO Module
Shapes the traffic output of the selected interface.
Creates a QoS output policy.
peak
followed by the peak rate in Mbps.
committed-rate
Quality of Service (QoS) | 477